One end of the pipe or hose is placed into the high-pressure
cleaning unit's insertion shaft and the special spray gun attached to the other
end. When the trigger is activated an intensive pulsating jet of air and rinsing
agent forms on the mix head and flows through the pipe or hose line. The rinsing
agent is subsequently collected in the insertion shaft, filtered and reconducted
into the circular flow. The spray gun trigger is equipped with a compressed
air setting for blowing pipe or hose interiors dry after rinsing.
The Advantages at a Glance...
Covers inside diameters from 4 to 40 mm with just one cleaning head
Employs a low-odour, environmentally friendly rinsing agent
One end of the pipe or hose is placed into the high-pressure
cleaning unit's insertion shaft and the special spray gun attached to the other
end. When the trigger is activated an intensive pulsating jet of air and rinsing
agent forms on the mix head and flows through the pipe or hose line. The rinsing
agent is subsequently collected in the insertion shaft, filtered and reconducted
into the circular flow. The spray gun trigger is equipped with a compressed
air setting for blowing pipe or hose interiors dry after rinsing.